BE SURE TO LEAVE ENOUGH WIRE AT THE SPEAKER LOCATION TO FEED THROUGH THE TUNNEL IN THE SPEAKER ENCLOSURE AND CONNECT TO THE TERMINALS ON THE FRONT. NOTE: TO INCREASE WATER RESISTANCE AND MAKE INSTALLATION EASIER, THE SPEAKER WIRE TERMINALS ARE LOCATED ON THE MARINER SPEAKERS’ FRONT PANEL. Run the speaker wires from the amplifier to the speaker locations and through the holes in the brackets and mounting bases, if used (see figure 3). In most cases you will be able to attach the FastMount brackets directly to the mounting surface.(IF THE AMP’S AC PLUG IS ACCESSIBLE WE RECOMMEND THAT YOU UNPLUG IT FROM THE WALL OUTLET TO AVOID ACCIDENTAL TURN-ON AND POSSIBLE DAMAGE TO THE AMPLIFIER.)
WARNING: TURN THE AMPLIFIER’S POWER OFF UNTIL YOU HAVE COMPLETED ALL OF THE CONNECTIONS AND HAVE DETERMINED THAT THEY ARE CORRECT. Please refer to the wiring chart (see figure 2) to determine which size wire to use over the given distance between the amplifier/receiver and the speakers. When installing Sonance Mariner Outdoor Speakers careful consideration should be made when determining speaker placement and what guage wire should be used.
You can orient the speakers either horizontally or vertically without affecting the sound quality.If you are mounting the speakers above or below ear level, pivot them up or down to direct the sound towards the listeners.The best performance is obtained by placing the speakers at ear level, facing the listeners.
0 kommentar(er)
